|
| Settings You Can Change with the User Tools |
|
| |
Menu | Description | |
|
| |
3. Set Ratio | Select which Reduce, Enlarge or Input Ratio is shown on the panel | |
| display with priority when the {Reduce/Enlarge} key is pressed. | |
| Note | |
| ❒ Default: | |
| • Ratio 1: 65% 81/2" ⋅ 11"→51/2" ⋅ 81/2" | |
| • Ratio 2: 78% 81/2" ⋅ 14"→81/2" ⋅ 11" | |
| • | Ratio 3: 93% |
| • Ratio 4: 129% 51/2" ⋅ 81/2"→81/2" ⋅ 11" | |
| • Ratio 5: 155% 51/2" ⋅ 81/2"→81/2" ⋅ 14" | |
|
| |
4. Copy Reset Timer | The machine returns to its initial condition automatically after | |
| your job is finished. When you set the time, select “1. On/Off” to | |
| “On” and then set the “2. Timer” to the desired time. The time can | |
| be selected from 10 to 999 seconds. | |
| Note | |
| ❒ Default: | |
| • | 1. On/Off: On |
| • 2. Timer: 60 sec. | |
|
| |
5. Orig. Orientation | You can select the orientation of originals with Combine mode. | |
| Note | |
| ❒ Default: Off | |
|
| |
6. Bypass Paper Type | You can select the type of paper for the bypass tray. | |
| Note | |
| ❒ Default: Thick | |
|
| |
7. Key Op. Tools | If the machine is set to use the User Code function, operators must | |
| enter their user codes before the machine can operate. | |
| The machine can keep count of the number of copies made under | |
| each user code. | |
|
| |
1. User Code Access | Specify whether to employ user codes to restrict copier users, and | |
| manage the number of copies made. | |
| Note | |
| ❒ Default: Off | |
|
| |
2. Check Copy Counter | You can check the number of copies made under each user code. | |
|
| |
3. Print Counter List | You can print counter lists. | |
|
| |
4. Reset Counter | You can check the number of copies made under each user code. | |
| You can also reset each user code's counter to 0. | |
|
|
|
4
57
