Copying from the Bypass Tray
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP transparencies, adhesive labels, trans- lucent paper, postcards, envelopes, and copy paper that cannot be set in the paper tray.
Note
❒If you do not use standard size copy paper, you should enter ver- tical and horizontal dimensions. The sizes that you can enter are as follows:
Metric version | • | Vertical: |
|
| 90 – 216mm |
| • | Horizontal: |
|
| 140 – 356 mm |
|
|
|
Inch version | • | Vertical: 3.5" – 8.5" |
• Horizontal: 5.5" – 14"
Reference
For details about paper capacity in the bypass tray, see p.12 “Copy Pa- per”.
A Open the bypass tray.
B Push up the paper guide release lever.
2 |
1.Paper guide release lever
C Gently insert the copy paper face down and adjust the paper guides.
1.Horizontal size
2.Vertical size
3.Extender
4.Paper guides
Important
❒If the guides are not flush with the copy paper, a skew image or paper misfeeds might occur.
27
