Square the paper and load it in the tray | Lanier 5613 instruction

Changing the Paper Size

F Square the paper and load it in the tray.

Important

❒Do not stack paper over the lim- it mark.

G Adjust the side and back fences to the new paper size.

Important

❒When setting small quantities of copy paper, be careful not to squeeze in the side fence too much or paper will not be fed properly.

H Push the paper tray in until it stops.

Note

❒Select the new paper size with the User Tools. See p.51 “Select- ing the Paper Size with the User Tools”.

Changing the Paper Size in the Optional Paper tray unit

A Make sure that the paper tray is not being used.

B Pull out the paper tray until it stops.

Note	3
❒ Remove any remaining copy

paper.

C Adjust the back fence.

Note

❒When you load 81/4" ⋅ 14"L or 81/2" ⋅ 14"L copy paper, place the back fence in the corner pocket on the left.

49

Image 61

Lanier 5613 manual Square the paper and load it in the tray, Adjust the side and back fences to the new paper size

Contents

5613 Means Power ON. c means Stand by Safety During Operation Safety InformationPage Positions of Labels and Hallmarks for Rwarning and Rcaution Symbols How to Read this Manual Machine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components Operation switch On indicatorControl panel Bypass tray Paper tray unit Options Control Panel Copier only Fax and/or printer installed Dial Function keys Fax in- stalled machine only Fax function keys Fax installed machine onlyPrinter function keys Printer in- stalled machine only Number keys Displays and Key Operations Panel DisplayCopy display Common keys Turning On the Main Power Turning On the PowerOperation switch right side of the control panel Main power switch left side of the machine Press the operation switch to make the On indicator go on Turning Off the Main PowerTurn off the main power switch Starting the Machine Changing Modes Metric version OriginalsInch version Non-recommended originals for the document feeder ADF Exposure glass Document feeder ADF Original Sizes and Scanning Area/Missing Image Area Recommended Paper Sizes and Types Copy Paper Non-recommended Paper Paper Storage Toner Storage TonerUsed Toner Basics Make sure that the machine is in Copy mode Basic ProcedurePlace your originals Press the Start key Auto Off Placing Originals on Exposure Glass Placing Originals Placing Standard Size Originals Loading Originals Document Feeder ADFLimit mark Document guide Placing Custom Size Originals You can also enter this mode by pressing the R/# key Selecting an Original Type Basic FunctionsText Photo Selecting Copy Paper Sort SortSort After all originals are scanned, press the R/# key Enter the number of copy sets with the number keys Copying from the Bypass Tray Push down the paper guide re- lease lever When copying onto OHP transparencies When copying onto custom size copy paper When copying onto standard size paperPress the R/# key When copying onto envelopes Other Functions Setting the User CodeUser Codes Auto Start Press the Reduce/Enlarge key Preset Reduce/EnlargePress the OK key Place your originals, and then press the Start key Press the Zoom key Enter the ratio ZoomEnter the desired reproduction ratios with the 0 or 1 key Enter the desired ratio with the number keys Portrait K originals CombineLandscape L originals Load your originals, and then press the Start key Select with the 0 or 1 key, and then press the OK key Following shows the combinations of functions Combination Chart Copying General Machine Operation ProblemsDisplay Cannot Make Clear Copies Combine Cannot Make Desired Copies Loading paper in the optional paper tray unit HLoading PaperPush the paper tray in until it stops Readjust the back fence and side fences Regarding toner storage, see p.15 Toner Storage HChanging the Toner Cartridge HChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Changing the Paper Size Adjust the back fenceChanging the Paper Size in the Paper Tray Square the paper and load it in the tray Adjust the side and back fences to the new paper size Push the paper tray in until it stops Selecting the Paper Size with the User Tools When you have selected Custom Size on step E Troubleshooting Accessing the User Tools Copier Features User Tools Copier Features Exiting the User Tools User Tools Menu Copier Features Copier Features Settings You Can Change with the User Tools Menu Description User Tools Copier Features Dos and Donts Remarks Machine Environment Where to Put Your MachineOptimum environmental conditions Environments to avoid Power Connection Access to Machine Maintaining Your Machine Cleaning the machine Remarks Mainframe Non-reproduction area Copy paper weightFirst copy time Copying speed Dimensions W ⋅ D ⋅ H up to exposure glass Power consumptionWeight Noise Emission *1 Document Feeder ADF Option for Type Available paper size Paper Tray Unit OptionPaper capacity Memory capacity 32MB Copier Memory Unit OptionAdditional functions Number of originals that can be stored about 99 pages Index Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045