Manuals / Samsung / Computer Equipment / All in One Printer

Samsung SF-5100 manual LCD error messages, Display Meaning Solution

Models: SF-5100

1 97

Download 97 pages 62.87 Kb

Page 74

07-Troubleshooting 2000/04/03 3:03 PM Page 7

LCD error messages

Display

Meaning

Solution

	DOCUMENT JAM	The loaded document has jammed	Clear the document jam.
	DOCUMENT JAM	in the feeder.
		in the feeder.

	DOOR OPEN	The top cover is not securely	Press down on the cover until
	DOOR OPEN	latched.	it clicks in place.
		latched.	it clicks in place.

		There is a problem in the fuser	Unplug the power code and plug
	FUSER ERROR	unit.	it back in. If the problem still per-
			sists, please call for service.

		Recording paper has jammed	Clear the jam, or install the
	JAM/NO CARTRIDGE	inside the unit, or the toner	cartridge.
		cartridge is not installed.

		Your unit cannot connect with the	Try again. If failure persists, wait
		remote machine, or has lost con-	an hour or so for the line to clear,
	LINE ERROR	tact because of a problem on the	then try again.
		phone line.	Or, turn the ECM mode on. See
			‘System setup’ on page 5.5.

		You have attempted to set up a	Load a document and try again.
	LOAD DOCUMENT !	sending operation with no docu-	Load a document and try again.
	LOAD DOCUMENT !	sending operation with no docu-
		ment loaded.

		A problem has occurred in the	Unplug the power cord and plug
	LSU ERROR	LSU (Laser Scanning Unit).	it back in. If the problem still per-
			sists, please call for service.

			Either delete unnecessary docu-
	MEMORY FULL	The memory is full.	ments, or retransmit after more
	MEMORY FULL	The memory is full.	memory becomes available, or
			memory becomes available, or
			split the transmission into more
			than one operation.

		The remote machine has not	Try again. Make sure the remote
	NO ANSWER	answered after all the redial	machine is operational.
		attempts.

		The one-touch or speed dial loca-	Dial the number manually with
	NO. NOT ASSIGNED	tion you tried to use has no num-	the keypad, or assign a number.
		ber assigned to it.

	NO PAPER	The recording paper has run out.	Load the recording paper.

		The printer part in your unit	Please wait until it cools down.
	OVER HEAT	has overheated.	If you cannot solve the problem,
			please call for service.

Troubleshooting 6.5

Image 74

Samsung SF-5100 manual LCD error messages, Display Meaning Solution

Contents

Laser Facsimile Trademark Notices Contents Other functions Receiving a faxMaking a copy Automatic dialing Troubleshooting Maintenance Important safety information Precautions Safety notes Symbology Installation Unpacking Control locations and functions Front view Rear view Document tray Setting up your machineChoosing a location Paper exit tray Document exit tray Handset and handset cradle Attach the handset cradle to the main body Extension phone optional AC power cordTelephone line Installing the toner cartridge Installation Loading paper Insert the paper with the print side facing you Paper type and size Printing a demo Getting started Using the control panel Setup Using the number keypad Entering alphanumeric characters Keypad Character Assignments Inserting pause Entering numbersEditing numbers or name Setting up your fax number and name Press Start/Enter when the name on the display is correct Enter the correct time and date using the number keypad Setting the time and datePress !or ❿ until ‘TIME/DATE SETUP’ appears, then press Speaker volume Adjusting volumeRinger volume Alarm volume/Key volume Basic operation Sending a fax Preparing documents for faxing or copying Contrast Setting document resolution and contrastResolution Loading document Sending a fax after talking Canceling transmissionSending a fax automatically Confirming transmission Sending a voice request Voice requestAutomatic redial Answering a voice request Receiving a fax Receiving modes Distinctive ring pattern detection Drpd Receiving automatically in FAX modeReceiving manually in TEL mode Receiving in Auto mode Receiving automatically in ANS/FAX mode Receiving manually using an extension telephone Copying overview Making a simple copy Press Copy or Start/Enter to begin the copy operation Advanced copy featuresPress or ❿ to choose on or OFF To search through redial memory RedialTo redial the number last called Press and hold Redial/Pause for 2 seconds Sending a recall Monitoring a dual job status One-touch dialing Storing a number for one-touch dialing If you do not want to assign a name, skip this step Sending a fax using a one-touch numberEditing a number for one-touch dialing Press and hold Speed for 2 seconds Speed dialingStoring a number for speed dialing Enter the number you want to store, then press Start/Enter Sending a fax using a speed number Editing a number for speed dialing Searching with a particular first letter Searching for a number in the memorySearching sequentially through the memory Advanced fax Broadcasting Press Advanced FAX on the control panel Delayed fax JOB ❿CANCEL ❿DONE TIME1330=1330 Priority fax Send polling What is polling?Polling Press or ❿ to select YES or no If you want to cancel the operation, press Stop at any time Receive polling Press or ❿ until ‘ADD SCHEDULE’ appears, then press Canceling a scheduled operationAdding documents to a scheduled operation Additional features Printing reports Help List Press or ❿ until ‘SYSTEM Setup ’appears, then press System setupSetting an option Selectable options Additional features Additional features Additional features Storing one-touch or speed dial numbers for group dial- ing Press Setup on the control panelPress or ❿ until you find ‘GROUP Dial SETUP’, then press Sending a fax using group dialing Multi-address transmission Editing group dial numbers Clearing memory Press or ❿ until ‘MEMORY CLEAR’ appears, then press Troubleshooting Clearing jams Document jams while sending a fax Paper jams while the machine is printing If Jammed in the Printer Output Area Tips for avoiding paper jams LCD error messages Display Meaning Solution Paper JAM Fixing problems Symptom Cause and Solution Symptom Cause and Solution Press Stop to return to standby mode Cleaning the OPC drumPress or ❿ until ‘MAINTENANCE’ appears, then press Press or ❿ until you find ‘ADJUST SHADING’, then press Adjusting shadingSetting the machine to be checked by phone Open the control panel using your hand Sending toner low information to the service companyCleaning the document scanner Disassemble the white roller as follows Carefully wipe the scanning glass with a soft, dry cloth Replacing the toner cartridge Managing the toner cartridgeExpected cartridge life Pulling the cover release buttons toward you, open the cover Close the cover firmly Memo Appendix FCC regulations Canadian radio interference regulations Information to User Party Responsible for Product Compliance Laser safety statement Safety information Power saver Specifications Pabx Index Appendix Appendix Electronics