Automatic redial
When you send a fax, if the number you have dialled is busy or there is no answer, the machine will automatically redial the number every three minutes up to a maximum of two times.
The display shows ‘RETRY REDIAL?’. To redial the number without waiting, press Start/Enter. To cancel the automatic redial, press Stop.
Voice request
If you are sending or receiving a document and need to speak to the other person during the same phone call, use voice request to alert the person at the remote site. You can also respond to a voice request made by the person at the remote end.
Sending a voice request
1.Press OHD/V.Req while a document is being sent or received. Voice request signal is stored and then sent to the remote fax machine after the document has been sent or received.
2.When the phone rings, pick up the handset and answer it.
You can cancel a voice request by pressing OHD/V.Req again while you are sending or receiving a document.
Answering a voice request
When the phone rings after sending or receiving a fax, pick up the handset and answer it.
If you do not answer the voice request, the machine prints out the number that made the voice request, as well as the time and date that the request was made.
Basic operation 3.5
