•AUTO REDUCTION — When receiving a document as long as or longer than the paper loaded in your machine, the machine can reduce the data in the document to fit into your recording paper size.
Turn on this feature if you want to reduce an incoming page that may otherwise need to be divided into two pages with only a few centime- ters on the second page. If the fax machine cannot reduce the data to fit onto one page with this feature enabled, the data will be divided and printed in actual size on two or more sheets if needed.
Select ON to turn this feature on. Note that this feature does not apply to the copy mode.
Select OFF to turn this feature off. The overflow data will be printed out on a second page.
•DISCARD SIZE — When receiving or copying a document as long as or longer than the paper installed in your machine, you can set the machine to discard any excess image at the bottom of the page to fit onto the recording paper size.
Enter the desired discard size from 0 through 30 mm using the number keypad, and press Start/Enter.
If the received page is outside the margin you have set, it will be printed on two sheets of paper at the actual size.
If the data is within the margin, and the auto reduction feature is turned on, it will be reduced to fit onto the appropriate size paper (Discard does not take place). If the auto reduction feature is turned OFF or fails, the data within the margin will be discarded.
•RINGS TO ANSWER
•STAMP RCV.
Select ON to turn this feature on. Select OFF to turn this feature off.
