Paper JAM | Samsung SF-5100 manual

07-Troubleshooting 2000/04/03 3:03 PM Page 8

	Display	Meaning	Solution

	PAPER JAM 0	Recording paper has jammed in	Press Stop and clear the jam.
	PAPER JAM 0	the paper feeding area.
		the paper feeding area.

	PAPER JAM 2	Jammed paper still remains	Clear the jam.
	PAPER JAM 2	inside the unit.
		inside the unit.

		The remote fax machine you	The remote operator should know
		want to poll is not ready to	in advance that you are polling
	POLLING ERROR	respond to your poll.	and have their fax unit loaded
	POLLING ERROR	Or	with the original document.
			with the original document.

		When setting up to poll another	Enter the correct poll code.
		fax machine, you have used an	Enter the correct poll code.
		fax machine, you have used an
		incorrect poll code.

	POWER FAILURE	A power failure has occurred.	If documents have been stored in
	POWER FAILURE	A power failure has occurred.	the memory, a ‘Power Failure
			Report’ will be printed auto-
			matically when the power is
			restored.

	RECEIVE ERROR	A fax has not been received	A problem with the facsmile
	RECEIVE ERROR	successfully.	communications has occurred.
		successfully.	communications has occurred.
			Ask the sender to try again.

		The machine is waiting for a	You can press Start/Enter to
	RETRY REDIAL ?	specified time interval to redial	immediately redial, or Stop to
	RETRY REDIAL ?	a previously busy station.	cancel the redial operation.
		a previously busy station.	cancel the redial operation.

	SEND ERROR	Your fax has not gone through	A problem with the facsimile
	SEND ERROR	successfully.	communications has occurred.
		successfully.	communications has occurred.
			Try again.

	TONER EMPTY	The toner cartridge has run out.	Replace with a new toner
	TONER EMPTY	The machine stops.	cartridge.
		The machine stops.	cartridge.

	TONER LOW	The toner is almost empty.	Take out the toner cartridge and
	TONER LOW		gently shake it. By doing this,
			gently shake it. By doing this,
			you can temporarily re-establish
			printing operations.

	WARMING UP	The printer is warming up and	Wait until the printer is on-line.
	WARMING UP	is off-line.
		is off-line.

6.6 Troubleshooting

Image 75

Samsung SF-5100 manual Paper JAM

Contents

Laser Facsimile Trademark Notices Contents Automatic dialing Receiving a faxMaking a copy Other functions Maintenance Troubleshooting Important safety information Precautions Symbology Safety notes Installation Unpacking Front view Control locations and functions Rear view Paper exit tray Setting up your machineChoosing a location Document tray Handset and handset cradle Document exit tray Attach the handset cradle to the main body AC power cord Telephone lineExtension phone optional Installing the toner cartridge Installation Loading paper Insert the paper with the print side facing you Paper type and size Printing a demo Getting started Using the control panel Setup Entering alphanumeric characters Using the number keypad Keypad Character Assignments Entering numbers Editing numbers or nameInserting pause Press Start/Enter when the name on the display is correct Setting up your fax number and name Setting the time and date Press !or ❿ until ‘TIME/DATE SETUP’ appears, then pressEnter the correct time and date using the number keypad Alarm volume/Key volume Adjusting volumeRinger volume Speaker volume Basic operation Preparing documents for faxing or copying Sending a fax Setting document resolution and contrast ResolutionContrast Loading document Confirming transmission Canceling transmissionSending a fax automatically Sending a fax after talking Answering a voice request Voice requestAutomatic redial Sending a voice request Receiving modes Receiving a fax Receiving automatically in FAX mode Receiving manually in TEL modeDistinctive ring pattern detection Drpd Receiving automatically in ANS/FAX mode Receiving in Auto mode Receiving manually using an extension telephone Making a simple copy Copying overview Advanced copy features Press or ❿ to choose on or OFFPress Copy or Start/Enter to begin the copy operation Press and hold Redial/Pause for 2 seconds RedialTo redial the number last called To search through redial memory Monitoring a dual job status Sending a recall Storing a number for one-touch dialing One-touch dialing Sending a fax using a one-touch number Editing a number for one-touch dialingIf you do not want to assign a name, skip this step Enter the number you want to store, then press Start/Enter Speed dialingStoring a number for speed dialing Press and hold Speed for 2 seconds Editing a number for speed dialing Sending a fax using a speed number Searching for a number in the memory Searching sequentially through the memorySearching with a particular first letter Advanced fax Press Advanced FAX on the control panel Broadcasting JOB ❿CANCEL ❿DONE Delayed fax TIME1330=1330 Priority fax Press or ❿ to select YES or no What is polling?Polling Send polling Receive polling If you want to cancel the operation, press Stop at any time Canceling a scheduled operation Adding documents to a scheduled operationPress or ❿ until ‘ADD SCHEDULE’ appears, then press Additional features Help List Printing reports System setup Setting an optionPress or ❿ until ‘SYSTEM Setup ’appears, then press Selectable options Additional features Additional features Additional features Press Setup on the control panel Press or ❿ until you find ‘GROUP Dial SETUP’, then pressStoring one-touch or speed dial numbers for group dial- ing Editing group dial numbers Sending a fax using group dialing Multi-address transmission Press or ❿ until ‘MEMORY CLEAR’ appears, then press Clearing memory Troubleshooting Document jams while sending a fax Clearing jams Paper jams while the machine is printing If Jammed in the Printer Output Area Tips for avoiding paper jams Display Meaning Solution LCD error messages Paper JAM Symptom Cause and Solution Fixing problems Symptom Cause and Solution Cleaning the OPC drum Press or ❿ until ‘MAINTENANCE’ appears, then pressPress Stop to return to standby mode Adjusting shading Setting the machine to be checked by phonePress or ❿ until you find ‘ADJUST SHADING’, then press Sending toner low information to the service company Cleaning the document scannerOpen the control panel using your hand Disassemble the white roller as follows Carefully wipe the scanning glass with a soft, dry cloth Managing the toner cartridge Expected cartridge lifeReplacing the toner cartridge Pulling the cover release buttons toward you, open the cover Close the cover firmly Memo Appendix Canadian radio interference regulations FCC regulations Party Responsible for Product Compliance Information to User Laser safety statement Safety information Power saver Pabx Specifications Index Appendix Appendix Electronics