Panasonic KX-TG1840AL operating instructions Display setup, Selecting the standby mode display

TG1840AL(e-e).book Page 31 Tuesday, April 11, 2006 11:02 AM

Handset Settings

6Select the desired setting, then press

{>}.

7Press {ih}.

Note:

L When the answering system answers the call, this feature does not work.

Selecting categories to bypass night mode

1Press {j/OK}.

2Select “Handset Setup”, then press

{>}.

3Select “Ringer Setup”, then press

{>}.

4Select “Night Mode”, then press {>}.

5Select “Select Category”, then press {>}.

6Press the desired category numbers, then press {j/OK}.

L The selected category number will flash.

L To cancel a selected category number, press the number again. The number will stop flashing.

7Press {ih}.

Note:

L If a call is received from one of the categories set to bypass night mode, the handset will ring.

Display setup

Selecting the standby mode display

“Base Number”: The current base unit number is displayed.

“Handset Number”: The current handset number is displayed.

“Off”: Only the current date and time are displayed.

1Press {j/OK}.

2Select “Handset Setup”, then press

{>}.

3Select “Display Setup”, then press

{>}.

4Select “Standby Display”, then press {>}.

5Select the desired setting, then press

{>}.

6Press {ih}.

Note:

L If “Base Number” is selected and the current base unit number is 2, “-2-”is displayed.

L If “Handset Number” is selected and the current handset number is 2, “[2]” is displayed.

Changing the display language

1Press {j/OK}.

2Select “Handset Setup”, then press

{>}.

3Select “Display Setup”, then press

{>}.

4Select “Select Language”, then press {>}.

5Select the desired language, then press

{>}.

6Press {ih}.

Note:

L If you select a language you cannot read, press {ih}, {j/OK}, press {e} 2 times, press {>}, press {v} 2 times, press {>}, press {v}, press {>}, select the desired language, then press {>}. Press {ih}.

Changing the display contrast

1Press {j/OK}.

31