Panasonic KX-TG1840AL Guide to answering, System settings, Changing the number of rings, Remotely

TG1840AL(e-e).book Page 55 Tuesday, April 11, 2006 11:02 AM

					Answering System Features
L If message memory is full, erase				L The greeting message is played back.
	unnecessary messages (page 55).			L You can hang up, or enter your remote
					access code again and begin remote
Remote commands					operation.
You can press dial keys to access certain
answering system functions without waiting
for the voice guidance to prompt you.				Guide to answering
Key			Remote command
				system settings
{1}			Repeat message (during
			playback)*1	If the base unit is reset to its default settings
{2}			Skip message (during	(page 38), the following answering system-
			playback)	related settings will be reset.
{4}			Play new messages
				Answering		Default	Page
{5}			Play all messages
				system setting		setting
{6}			Play greeting message	Answering		Answer On	page
{7}			Record greeting message	system on/off			50
{9}			Stop (recording, playback)	Remote access		—	page
{0}			Turn answering system off	code			54
				Number of		4 Rings	page
{*}{4}		Erase this message (during
			playback)	rings			55
				Caller’s		3 Minutes	page
{*}{5}			Erase all messages
				recording time			56
{*}{6}		Erase greeting message
				Call screening		On	page
			(during greeting message
			playback)				56
				Message alert		Off	page
{*}{#}		End remote operation (or
			hang up)				57
*1 If pressed within the first 5 seconds of
				Changing the number of rings
	a message, the previous message will			You can change the number of times the
	be played.
				phone rings before the unit answers calls.
				You can select 2 to 7 rings, or “Auto”.
Turning on the answering system				“Auto”: The unit answers after 2 rings when
remotely				new messages have been recorded, and
If the answering system is off, you can turn it				after 5 rings when there are no new
				messages. If you call your phone from
on remotely.
				outside to listen to new messages (page
1 Dial your phone number from a touch
				54), you will know that there are no
	tone phone.			messages when the phone rings for the 3rd
2 Let the phone ring 15 times.				time. You can then hang up without being
	L A long beep will be heard.			charged for the call.
				1 Press {j/OK}.
3 Enter your remote access code within 10
	seconds after the long beep.
							55