Panasonic KX-TG1840AL operating instructions Storing the PBX line access number for PBX users only

TG1840AL(e-e).book Page 47 Tuesday, April 11, 2006 11:02 AM

SMS (Short Message Service)

Note:

L If you change the name of a mailbox which has messages in the receive list, the messages will remain in the receive list under the new mailbox name.

L If you erase a mailbox, its messages will also be erased.

Storing the PBX line access number (for PBX users only)

Store your PBX line access number (4 digits max.) so that SMS messages are sent properly. When sending SMS messages to entries in the handset phonebook or redial list, the PBX line access number will be deleted.

1Press {j/OK}.

2Select “SMS”, then press {>}.

3Select “Public”, then press {>}.

4Select “Settings”, then press {>}.

5Enter “0000” (default base unit PIN). L If you changed the PIN, enter it (page

38).

6Select “PBX Access No.”, then press

{>}.

7Select “On”, then press {>}.

8Enter your PBX line access code and a dialling pause, if necessary, then press

{j/OK}.

9Select “Save”, then press {>}.

10Press {ih}.

47