106 CHAPTER TWELVE
To erase messages all at once
1
Press Erase. The screen prompts you to choose what kind of
messages you want to erase.
ERASE ALL VOICE?
SELECT { } & SET
2
Press or to select erasing all voice messages (ERASE ALL
VOICE?), all document messages (ERASE ALL DOC?), or all
messages—both voice and fax—(ERASE ALL MSG.?).
3
Press Set.
4
Press 1 to erase.
—OR—
Press 2 to cancel.
Setting the Maximum Time for Incoming
Messages
Your MFC comes set to receive voice messages up to 35 seconds long.
You can change this setting to any length from 35 seconds to 60 seconds,
in 5-second increments. This setting also applies to Memo.
1
Press Menu, 1, 8, 4. The screen prompts you to select a maximum
time.
MESSAGE 35 SEC
SELECT { } & SET
2
Press or to select the maximum time setting for incoming
messages.
3
Press Set when the screen displays your setting.
4
Press Stop to exit.
Setting the T oll Saver
When you set the Toll Saver feature, the MFC answers after 4 rings if
you don’t have messages, and after 2 rings if you do have messages. This
way, when you call the MFC, if it rings 3 times, you know you have no
messages, and can hang up, avoiding any toll charge.
See
“Ring Delay”
chap. 6