5

35

 

C H A P T E R F I V E

 

Initial

 

Setup

 

Getting Started

Setting the Dialling Mode (Tone/Pulse)

Your MFC is initially set to TONE. If you are using a PULSE dial line, you can change the setting to PULSE by following the steps below.

1Press Menu, 1, 1, 1. The screen prompts you to select TONE or

PULSE.

DIALLING:TONE

DIALLING:PULSE

2Use or to select the dialling mode.

3Press Set when the screen displays the dialling mode you want.

4Press Stop to exit.

Although this equipment can use either Pulse or Tone signalling, only the performance of the Tone signalling is subject to regulatory requirements for correct operation. It is therefore strongly recommended that the equipment is set to use the Tone signalling for access to public or private emergency services. The Tone signalling also provides faster call set up.

Setting the Date and Time

Your MFC displays the date and time, and prints it on every fax you send.

In the event of a power failure, the MFC maintains date and time information for several hours. All other settings remain unaffected.

Page 47
Image 47
Brother MFC-730, MFC-740 Initial Setup, Getting Started, Setting the Dialling Mode Tone/Pulse, Setting the Date and Time