112 C H A P T E R T W E L V E
Retrieving the Memory Status List
You can retrieve the Memory Status List from a remote fax machine to see if you have any fax messages.
1Dial your MFC’s number.
2When you hear the beep, immediately enter your Remote Access Code (The factory setting is 1 5 9 
).
3When you hear two short beeps, use the dial pad to press 9 6 1.
4Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want the Memory Status List forwarded, and then press # #.
You cannot use 
and # as dial numbers. However, if you want to store a pause, press #.
5After you hear your MFC beep, hang up and wait.
Your MFC calls the remote fax machine. Your MFC then sends the Memory Status List to the fax machine that you are calling from.
Retrieving Fax Messages
1Dial your MFC’s number.
2When you hear the beep, immediately enter your Remote Access Code (The factory setting is 1 5 9 
).
3As soon as you hear two short beeps, use the dial pad to press 9 6 2.
4Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want your fax messages forwarded, and then press # #.
You cannot use 
and # as dial numbers. However, if you want to store a pause, press #.
5After you hear your MFC beep, hang up and wait.
Your MFC calls the remote fax machine. The fax machine that you are calling from prints your fax messages.
Changing the Fax Forwarding Number
You can change the default setting of your fax forwarding number from a remote fax machine.
1Dial your MFC’s number.
2When you hear the beep, immediately enter your Remote Access Code (The factory setting is 1 5 9 
).
