Brother MFC-740, MFC-730 owner manual Real Time Transmission, Real Time TX

62 C H A P T E R S E V E N

See “One Touch and Speed Dial” chap. 9

See “Setting Station ID” chap. 5

If you try to scan in and store a 51st fax, the MFC will send it immediately, without storing it in memory.

If you get a MEMORY FULL message while scanning the first page of a fax, press Stop to cancel a scan. If you get a MEMORY FULL message while scanning in a subsequent page, you'll have the option to press Start to transmit the pages scanned so far, or to press Stop to cancel the operation.

Real Time Transmission

When memory is full, the MFC cannot continue to scan documents into memory before sending. However, you can turn on REAL TIME TX. Then place the documents in the feeder and enter the fax number. As soon as the phone line is free, the MFC starts dialling and sending the fax.

1Place the document in the feeder.

2Press Menu, 1, 3, 9. The screen displays

9.REAL TIME TX

3To change the default setting, press or to select ON (or OFF)

and press Set. Go to Step 5 ––OR–– For the next fax transmission

only, press or to select NEXT FAX ONLY and press Set.

4For the next fax only, press or to select ON (or OFF) and press Set.

5Press 1 if you want to select additional settings. The display returns to the SETUP SEND menu ––OR–– Press2 if you are finished choosing settings and go to Step 6.

6Enter fax number and press Start.