203
(For MFC-730) ➔
(For MFC-740)
➔
Change Answer Mode
Press 9 8
then for TAD, press 1.
Fax/Tel (F/T), press 2.
Fax, press 3.
Exit Remote Operation
Press 9 0.
Change Remote Access Code
1Press Menu, 1, 8, 3.
2Enter the 
cannot be changed.
3Press Set.
4Press Stop to exit.
REMOTE CONTROL ACCESS CARD
Using Remote Access Code
1Dial your machine phone number from a touch tone phone.
2Enter your Remote Control Access Code (159
) after the beep.
3Your machine signals the kinds of messages received:
1 long beep — Fax message(s) No beeps — no messages
4After 2 short beeps, enter a command.
5Press 9 0 to reset your machine when you finish.
4 |
| 6 Hang up. | 1 |
| |||
|
|
|
|
Retrieve all faxes press 2, then enter the number of remote fax machine, and then # #. After the beep, hang up and wait.
Erase all fax messages press 3.
Check Receiving Status
Press 9 7
then for Fax message, press 1. Voice message, press 2.
1 long beep — received messages
3 short beeps — no messages
Change Answer Mode
Press 9 8
then for Message Manager (TAD mode), press 1.
Fax/Telephone (F/T), press 2. Fax Only, press 3.
Exit Remote Operation
Press 9 0.
MESSAGE MANAGER
REMOTE CONTROL ACCESS CARD
Using Remote Access Code
1Dial your MFC phone number from a touch tone phone.
2Enter your Remote Control Access Code (159
) after the beep.
3The MFC signals the kinds of messages received:
1 long beep — Fax message(s)
2 long beeps — Voice message(s)
3 long beeps — Fax and Voice message(s) No beeps — no messages
4After 2 short beeps, enter a command.
5Press 9 0 to reset the MFC when you finish.
6Hang up.
5 | 6 | 1 |
