Brother MFC-730, MFC-740 owner manual Setup Receive

O N - S C R E E N P R O G R A M M I N G 31

1.Fax Functions (continued)

2.SETUP RECEIVE

Function		Description	Factory Set		Chapter
1.	RING DELAY	Number of rings before the	RING DELAY:02		6
		MFC answers in Fax/Tel,	TOLL SAVER:OFF
		Fax or TAD (Message	(MFC-740)
		Manager for MFC-740) mode.
2.	F/T RING TIME	Sets the time for “F/T pseudo ring”	30		6
		in Fax/Tel mode.
3.	FAX DETECT	Receive fax messages without	ON		6
		pressing the Start key.
4.	REMOTE CODE	Enter code to activate or	OFF		6
		deactivate your MFC from a	(	51, #51)
		remote location.
5.	REDUCTION	Reduces size of image.	AUTO		6
6.	MEM. RECEIVE	Automatically stores any	ON		6
		incoming faxes in its memory
		if it runs out of paper.
7.	POLLING RX	You call another fax machine to	STANDARD		6
		receive a fax from it.
8.	PC INTERFACE	Turn on if PC is connected to	ON
		MFC for PC receiving of fax
		message.

3. SETUP SEND
Function		Description	Factory Set	Chapter
1.	COVERPG SETUP	Automatically sends a	OFF	7
		programmable cover page or
		prints a sample coverpage.
2.	COVERPAGE NOTE	Program customized message	--	7
		for fax cover page.
3.	CONTRAST	Change the lightness or	AUTO	7
		darkness of a fax you are
		sending.
4.	RESOLUTION	Allows you to change	STANDARD	7
		resolutions page by page.
5.	OVERSEAS MODE	Special setting for international	OFF	7
		transmissions.
6.	CALL RESERVE	You can send a fax, then speak	OFF	7
		to the person operating the
		other fax machine or print a
		sample call back message.
7.	TIMER	Set the MFC to send documents	--	7
		later.
8.	POLLED TX	Set Polled Transmission for	STANDARD	7
		someone to poll your MFC
		to receive a fax from you.
9.	REAL TIME TX	When memory is full, you can	OFF
		send faxes in real time.