S E T U P S E N D | 61 |
| |
|
|
See
“One Touch
Dialling”
chap. 9
See “Speed Dialling” chap. 9
Automatic Transmission
This is the easiest way to send a fax.
IMPORTANT: Do not pick up the handset
1Insert the document face down in the feeder.
2Enter the fax number using One Touch, Speed Dial,
3Press Start. The MFC starts scanning the document and the display indicates the job number and how much memony is available. Then the MFC will start dialling if it is not sending, receiving or printing the other documents.
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the fax.
1Insert the document face down in the feeder.
2Pick up the handset and listen for a dial tone
3Enter the fax number you want to call. (You can enter the digits using the dial pad or you can enter a One Touch or Speed Dial number or you can call from the
4When you hear the fax tone, press Start.
5To hang up, replace the handset
Note: Manual transmission does not use memory.
Fax Redial
If you’re sending a fax manually and the line is busy, you can retry the number by pressing Redial/Pause.
If you’re sending a fax automatically and the line is busy, the MFC will automatically redial up to 4 times at 2 minute intervals.
Dual Access
If the document feeder is empty, you can place a document in the feeder, set temporary settings, dial a number, and begin scanning the fax into memory, even when the MFC is receiving a fax, sending a fax, or printing a fax from memory. The screen displays the new job number and how much memory is available.
