186 C H A P T E R T W E N T Y
8Hold the ink cartridge as shown in the illustration, and remove the sealing tape from the side of the ink cartridge. Carefully peel the tape in the direction away from you..
opening
IMPORTANT: To prevent spilling ink and staining your hands and clothing, remove the sealing tape gently.
9Each colour has its own correct position. Insert each new ink cartridge into the carriage using the colour indicator on the print head as a guide.
Please be careful not to push down the switch bar.
10Close the cartridge cover until it clicks into place.
11After installing the ink cartridges, close the top cover. Your MFC prepares for a “head cleaning” and goes online. The display screen
prompts you to verify a new ink cartridge was inserted for each color you removed. Example: DID YOU CHANGE BLCK 1. YES 2. NO.
If the ink cartridge you installed is not a brand new one, please make sure to select 2.
12For each new cartridge, press 1 on the keypad to reset the ink dot counter for that colour automatically. (The ink dot counter enables the MFC to notify you when a colour is running low.)
The MFC will enter a cleaning cycle for approximately two minutes for each replaced cartridge. The display screen alternately shows CLEANING and PLEASE WAIT.
