80 | C H A P T E R N I N E |
|
Using access codes is easy. Sometimes you may want to choose from the among several long distance carriers when you make a call; rates may vary depending upon the time and destination. To take advantage of low rates, you can store the access codes or
Tone/Pulse
If you have pulse dialling service, but need to send tone signals (for telephone banking, for example), follow the directions below. If you have touch tone service, you do not need this feature to send tone signals.
1Lift the handset.
2Press #. Any digits dialled after this sends tone signals.
3When you hang up, the machine returns to pulse dialling service.
See | Fax/Tel Mode |
“Select |
|
| |
Answer | When you share one line for your telephone and fax machine, in the |
Mode” | Fax/Tel mode, the fax machine can determine whether an incoming call |
chap. 6 | is a fax or a telephone call. |
|
Answering Calls with the Speaker Phone (Only for MFC-740)
When the MFC rings, instead of lifting the handset, press
Speaker Phone. Speak clearly, toward the microphone. To end the call, press Speaker Phone.
If you have a bad telephone line connection, the other party might hear your voice echoed during the call. Hang up and try the call again — OR— pick up the handset.
Tel Key (Only for MFC-730)
If you press Tel when you are talking lifting the handset with the other end, you can hear the other end from machine’s monitor speaker, but the other end cannot hear you.
