26 | C H A P T E R T H R E E |
|
■Brother coated (ink jet) paper is coated only on one side. Make sure this whiter (coated) side is facing up toward you. Therefore, when loading paper in the paper cassette, make sure that the whiter side (the coated side) is facing up.
■The coated side of glossy paper is shiny. Do not touch the shiny side. Load glossy paper in the feeder with the shiny side facing up toward you.
■DO NOT touch the coated side of the paper or either side of transparencies, because the media absorbs water and perspiration easily, and this might cause decreased output quality.
■For optimum output quality, be sure to use paper appropriate for your resolution setting.
■Store paper in the original bag, and keep it sealed. Keep the paper flat and away from moisture and direct sunlight and heat.
■Transparencies designed for laser printers/copiers may stain your next document. Use only recommended transparencies for ink jet printer.
Paper Specifications for Cassette and Manual Slot
When used as a printer, the MFC can handle paper that has the following specifications:
But please note that you can receive fax messages only on A4 cut sheet
Paper Type | Paper Size | Cassette Capacity |
|
|
|
Cut Sheet | A4, Letter, Executive | 200 Sheets of 75 g/m2 |
| Legal | 100 Sheets of 75 g/m2 |
Coated Paper | A4, Letter | 100 Sheets |
Transparencies | A4, Letter | 20 |
Glossy Paper | A4, Letter | 20 |
Envelopes | DL, | 10 |
| B5, Monarch |
|
|
|
|
Organizer | J(Manual Feed Slot | 10 |
| only), K, L |
|
Paper Capacity for Feeder
Cut Sheet Paper Weight 60 to 120 g/m2
Sheet Feeder: Up to 22 mm/Approximately 200 Sheets of 75 g/m2
Output Stacker: Approximately 75 Sheets of 75 g/m2 Transparencies and glossy paper must be picked up from the paper tray page by page.
