7
INTRODUCTION
13
BrightnessLets you adjust the
brightness of the whole
image to be lighter or darker.
14
Paper TypeUse this key to temporarily
change the paper type setting
for Copy and Video Printing
modes.
15
Copy QualityUse this key to temporarily
change the quality and type
of original for Copy and
Video Printing modes.
16
Colour CopyMakes a full-colour copy.
17
Mono CopyMakes a black-and-white or
one-colour copy.
18
On/OffLineUse this key to turn the
printer online (ready to
receive PC data) and offline
(not ready to receive PC
data) alternately. When the
printer is online, the LCD
displays ONLINE.
19
ResetClears data from the printer
memory, and then resets and
restores to the factory default
settings.
20
Ink ManagementCleans the ink print heads
and/or resets the ink dot
counter after replacing an
ink cartridge.
21
PriorityWhen you press this key the
MFC enters printer mode,
and will not print faxes on
paper. Instead, faxes are
stored in the memory until
you press Priority again.
22
PlayLets you listen to voice
messages and outgoing
messages.
23
Message IndicatorLightsNotify you that you have
voice or fax messages in the
memory.
24
EraseLets you delete voice
messages, and/or fax
messages from the memory.
25
RecordLets you record Outgoing
Messages (OGM), memos
and telephone calls.
26
Help/BroadcastPress this key whenever you
want a quick reference Help
List printed. The Help List
shows how to perform
functions, how to register
information, and how to get
basic information. Also use
this key whenever you want
to broadcast faxes to many
different locations,
maximum of 174.
27
ModeUse to select how the MFC
will handle incoming calls.
28
ResolutionSets the resolution when you
send a fax.
29
Tel-IndexLets you look up numbers
stored in the dialling
memory.
27
30
Ink Empty IndicatorFlashes when ink cartridge is
low and stays lit when ink is
empty.
31
Liquid CrystalLCD displays messages to
help you set and operate
your MFC.
32
(Right Arrow)VerifyMoves the LCD cursor to the
right. When the machine is
idle, you can also use this
key to print the Transmission
Verification Report for your
last transmission.
33
(Left Arrow)MuteMoves the LCD cursor to the
left. You can also use this
key to put calls on hold.
34
MenuLets you access the function
and programming mode.
35
SetStores a function setting in
the MFC.
36
ClearDeletes entered data or backs
up one step in function
procedure.