4 | C H A P T E R O N E |
|
MFC-730 Control Panel Overview
29 | 28 | 30 | 27 26 31 25 | 24 | 23 | 22 21 |
status
status
1 | 1 | 2 | 3 |
2 | 4 | 5 | 6 |
3 | 7 | 8 | 9 |
4 |
| 0 |
|
5 | 6 | 7 | 8 | 11 13 | 9 | 12 | 10 |
20
19
18
17
16
15
14
1Tel
Use to shuttle the line between handset and monitor speaker.
2R (Recall)
Use this key to gain access to an outside line and/or to recall the operator or transfer a call to another extension when it is connected to a PABX.
3Redial / Pause
Redials the last number called. Also inserts a pause in autodial numbers.
4Speed Dial
Lets you dial stored phone numbers by pressing a two- digit number.
5Dial Pad
Dials phone and fax numbers, and can be used as a keyboard for entering information into the MFC.
# key lets you switch the dialling type during a telephone call from
“ PULSE” to “ TONE”.
6Volume High / Low
Adjusts speaker and ring volume.
7Shift
Use to access memory locations 13 through 24 in the One Touch keys and the
Verify and Mute key.
8One Touch Keys
These 12 keys give you instant access to previously stored phone numbers.
9Stop
Stops a fax, cancels an operation, or exits from function mode.
10Start
Starts an operation, such as sending a fax.
11Enlarge/Reduce
Lets you reduce or enlarge copies depending on the ratio you select.
