Sanyo PLC-XW56 owner manual How to Operate the On-Screen Menu, Top Control, Remote Control

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu. Refer to the following pages regarding each adjustment and setting procedures.

1	Press the MENU button to display the On-Screen
	Menu.
2	Press the Point ŻŹ buttons to select a Menu icon
	to adjust and press the Point Ÿź buttons to select
	an item to adjust.
3	Press the SELECT button to show the item data.
	To adjust the data, press the Point ŻŹ buttons.

Refer to the following pages for each adjustment.

To close the On-Screen Menu, press the MENU button again.

3Note:

The selected item is not active until the SELECT button is pressed.

Top Control

SELECT button

MENU button

Remote Control

MENU button

POINT buttons

SELECT button

On-Screen Menu	Menu icon
Menu bar	Pointer
	(red framed )

Pointer (red framed )

Press the Point Ÿź buttons to move the pointer.

Item

SELECT

button

Item data

Press the PointŻŹ

buttons to adjust the value.

Quit

Exit this menu.

20