Computer Input

Store

To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point Ÿź buttons and press the SELECT button. A confirmation box appears and then select [Yes].

Stored data can be called up by selecting "Image" in the Image Level Selection on page 30.

Quit

Exit the Image Adjust Menu.

Store item

Press the SELECT button at this item to store the adjusted data.

Move the red framed pointer to any of Image 1 to 4 where you want to set and then press the SELECT button.

The confirmation box appears, then select [Yes].

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.

1 Press the MENU button to display the On-Screen Menu. Press the Point ŻŹ buttons to move the red framed pointer to the Screen Menu icon.

2 Press the Point Ÿź buttons and move the red framed pointer to the function that you want to select and then press the SELECT button.

Normal

Provide the image to fit the screen size.

True

Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768 ), this projector enters panning mode automatically. Pan the image with Point ŸźŻŹ buttons. When adjusted, the arrows turns red. When reached to the correction limit, the arrows disappears.

Wide

Provide the image to fit wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9.

Full

Provide the full screen image.

Screen Menu

Screen Menu icon

Move the red framed pointer to the function and press the SELECT button.

3Note:

T h i s S c r e e n M e n u c a n n o t b e operated when 720p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.26).

The projector cannot display any resolution higher than 1600x1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector.

The image data in other than XGA (1024x768) is modified to fit the screen size in initial mode.

True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.26).

32

Page 32
Image 32
Sanyo PLC-XW56 owner manual Screen Size Adjustment, Normal, True, Wide, Full