Sanyo PLC-XW56 owner manual For zooming in and out the images, Digital zoom +

Computer Input

For zooming in and out the images

Digital zoom +

When the D.ZOOM + (Ÿ) is pressed, the On-Screen Menu disappears and the message "D. zoom +" is displayed. Press the D.ZOOM Ÿ or the SELECT button to expand the image size. And press the Point ŸźŻŹ buttons to pan the image. The Panning function can work only when the image is larger than the screen size.

Digital zoom –

When D.ZOOM – (ź) is pressed, the On-Screen Menu disappears and the message "D. zoom –" is displayed. Press the D.ZOOM ź or the SELECT button to compress image size.

This is used to reducing the size into original size.

To exit the Digital zoom +/– mode, press any button except the D.ZOOM Ÿź buttons, SELECT, and Point buttons.

To return to the previous screen size, select a screen size from the Screen Size Adjustment or select an input source from the Input Source Selection (p.25) again, or adjust the screen size with the D.ZOOM Ÿź buttons.

Remote Control

POINT buttons

SELECT button D.ZOOM + button

D.ZOOM - button

3Note:

•The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p.29)

•True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.26).

•Digital zoom +/- cannot be selected when Full or True is selected.

33