Basic Operation
Turning Off the Projector
1 Press the POWER
2 Press the POWER
starts to blink red, and it continues while the cooling fans are operating for about 120 seconds.
(You can select the level of fan quietness and The message disappears after 4 seconds. rotation speed. See page 50.)
At this time you can disconnect the AC power cord even if the fans are still running.
3 When the projector has cooled down enough to be turned on again, the POWER indicator lights
red.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
D O N O T O P E R A T E T H E P R O J E C T O R
CONTINUOUSLY WITHOUT REST. CONTINUOUS
USE MAY RESULT IN SHORTENING THE LAMP
LIFE. TURN OFF THE PROJECTOR AND LET
STAND FOR ABOUT AN HOUR IN EVERY 24
HOURS.
3Note:
•When the On start function is on, this projector is turned on automatically by connecting the AC power cord to an AC outlet. (p.47)
•The running speed of cooling fans is changed according to the temperature inside the projector.
•Do not put the projector in a case before the projector is cooled enough.
•If the WARNING indicator blinks or emits a red light, see "Warning Indicator" on page 51.
•While the POWER indicator is blinking, lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator becomes red to be turned on again.
•The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.
•The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal power- off processing for fan cooling is completed, compared with the time the AC power cord is immediately unplugged after the
19
