Sanyo PLC-XW56 owner manual Rear Terminal, ② Computer in /S-VIDEO in /COMPONENT

Part Names and Functions

Rear Terminal

① ② ③

①SERVICE PORT

This jack is used to service the projector.

②COMPUTER IN /S-VIDEO IN /COMPONENT IN

Connect output signal from a computer, RGB scart 21-pin video output, S-VIDEO output, or component video output to this terminal. (p.15-17)

③MONITOR OUT

This terminal can be used to output the incoming signal from COMPUTER IN/ S-VIDEO IN/COMPONENT IN terminal to the other monitor. (p.15, 17)

④AUDIO OUT (VARIABLE)

Connect an external audio amplifier to this jack. (p.15 - 17)

This terminal outputs sound from AUDIO IN terminal (⑤ or ⑦).

⑤COMPONENT/ COMPUTER AUDIO IN

Connect the audio output (stereo) from a computer or video equipment connected to ② to this jack. (p.15, 17)

④ ⑤ ⑥

⑦

⑥VIDEO IN

Connect the composite video output from video equipment to VIDEO jack. (p.16)

⑦AUDIO IN

Connect the audio output from video equipment connected to ② or ⑥ to this

jack. (When the audio output is monaural, connect it to L (MONO) jack.) (p.16)

9