| Appendix |
|
|
No sound | – Check audio cable connections from the audio input source. |
| – Adjust the audio source. |
| – Press the VOLUME + button. (See page 23.) |
| – Press the MUTE button. (See page 23.) |
| – Is the image projected? You will hear the sound only when the |
| image is projected. |
Some displays are not seen during operations
– Check the Display item. (See page 42.)
PIN code dialog box appears at the
–PIN code lock is being set. Input a PIN code (1234 or numbers you have set). (See pages 18, 48, and 49.)
The Remote Control does not work
–Check the batteries.
–Make sure there is no obstruction between the projector and remote control.
–Make sure you are not too far from the projector when using the remote control. Maximum operating range is 16.4' (5 m).
–Make sure the code of the remote control is conformed to that of the projector. (See page 47.)
–Unlock the Key lock function for the remote control. (See page 48.)
WARNING:
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.
The CE Mark is a Directive conformity mark of the European Community (EC).
This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.
Pixelworks ICs used.
57
