NETGEAR UTM50-100NAS List of IKE Policies Information, Description or Subfield and Description

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

.

Figure 7-20

Each policy contains the data that are explained in Table 7-9These fields are explained in more detail in Table 7-10 on page 7-27.

Table 7-9. List of IKE Policies Information

Item	Description (or Subfield and Description)
Name	The name that identifies the IKE policy. When you use the VPN Wizard to set up
	a VPN policy, an accompanying IKE policy is automatically created with the
	same name that you select for the VPN policy.
	Note: The name is not supplied to the remote VPN endpoint.
Mode	The exchange mode: Main or Aggressive.
Local ID	The IKE/ISAKMP identifier of the UTM. The remote endpoint must have this
	value as its remote ID.
Remote ID	The IKE/ISAKMP identifier of the remote endpoint, which must have this value
	as its Local ID.
Encr	The encryption algorithm that is used for the IKE security association (SA). This
	setting must match the setting on the remote endpoint.
Auth	The authentication algorithm that is used for the IKE SA. This setting must match
	the setting on the remote endpoint.
DH	The Diffie-Hellman (DH) group that is used when exchanging keys. This setting
	must match the setting on the remote endpoint.

To delete one or more IKE polices:

1.Select the checkbox to the left of the policy that you want to delete or click the Select All table button to select all IKE policies.

2.Click the Delete table button.

7-24 Virtual Private Networking Using IPsec Connections

v1.0, January 2010