Troubleshooting
Error Codes
ACould occur regularly. A common error that should not directly impair module operation. Example: Out of sequence user data packets.
BShould not occur often. Example: Something has been unplugged, or if it goes online without the DEFINITY® ECS
connected, get a V42 error.
CShould not occur at all. Probably the result of a hardware problem (or failure). Example: Number of times the DSP communication failed.
Error Code
Error Codes
Description | Cause |
|
|
104A
105A
106B
107B
108B
109A
110C
Number of received modem packets that contained an invalid V42 address.
Number of rejected received modem signaling packets because they were out of sequence.
Number of times maximum number of signaling packet
Number of times signaling channel had to be
Number of times signaling channel had no data for 16 consecutive seconds.
Number of times signaling channel timed out waiting for packet acknowledgment.
Number of times signaling channel transmit locked up (transmit buffers full when no data to send).
Information was sent to the DEFINITY ECS more than the acceptable number of times.
Packets (phone data) were sent with no acknowledgement, analogue line may have disconnected.
