
Configuration
How to Open a User Password File
Introduction The Switch Management Interface stores user, user group, and password information for the Rack in a user password file.
Example: test1.pwd
Note: For the initial setup of the Rack a “New” password file must be created before any User information can be entered, or status information can be displayed.
(see page 5-12 for more information)
Procedure To connect to the Rack and configure Switch Cards:
1.Select Open a Password Database from the Options menu, (see Figure 5.5).
2.Locate the database file (see Figure 5.6, on the next page)
3.Click Open. You will be automatically connected to the Rack.
Message reads:
Status: Please wait while detecting hardware……………
Note: The Switch Management Interface will automatically detect Switch Cards installed in the Rack.
Issue 1 October 1998