Troubleshooting
PBX Flag/Make Busy options
Item
PBX Flag
Make Busy
Description
If set, (see next page for procedure) the Switch Card is flagged by the remote module to be checked out by the administrator.
Used as a tool to take problem cards out of service.
Action Required
Check with remote user
qfor specific problems.
Click Make Card Busy to take the Switch Card off- line.
Normal: none
No answer:
Prevents the card from
qconnecting. When set, sends a command to disable auto answer on the modem.
OffqHook:
Card will not allow incoming connect request
qto occur.
The modem has placed the analog line off hook. (users trying to connect will get “Busy” signal)
Table 6-8. Flag definitions
Issue 1 October 1998
