Configuration
Configuration Steps continued
8.Assign User Groups to Switch Cards. Select the Hardware tab on the left and then the Passwords tab in the center of the screen. Assign User Groups to cards. (see page
9.Upload the User Groups to Switch Cards. This can be done individually, but it may be easier to do all the cards at once. Click on the Passwords icon and follow the instructions. (see page
10.Once the passwords are uploaded, always Save and Print the passwords for future reference. Keep the printed list in a secure location away from the Rack.
11.Make sure the Remote Module is configured. See steps below for information.
How to Configure the Remote Module
1.The Model 1101 Remote Module must be configured with the PBX dial phone number (i.e. the phone number of the PSTN line connected to the Switch Card). To use the COD or Dialback features, program the REM (remote) phone number along with the appropriate COD or Dialback options.
Note: See the Model 1101 Manual for details on configuring the remote module.
