Lucent Technologies 3100, 3000 manual How to Add/Remove Users, Click ‘ + Add User’

Configuration

How to Add/Remove Users

User	Up to 100 passwords can be programmed into each
Password	Switch Card.
guidelines	Passwords are retained in non-volatile memory inside
	the Switch Cards
	All user access codes must contain 8 to 10 digits,
	qincluding user ID and remote change digit.
	The 00 user ID is reserved for the administrator.

Adding Users

1.Click Users tab.

2.Click ‘ + Add User’.

3.Double click on the “first” and “last” name fields, and enter user’s information.

4.Assign a password, or click Random to allow the Switch Management Interface to generate a random password for the user.

5.Click Apply.

Note: To add additional users repeat steps 2 thru 5.

6.Click File and then Save to save the info to the password file.

Deleting Users

1.Select the user you wish to delete from the password file and click

‘- Delete User ’ to clear entry.

2.Confirm the delete by clicking Yes .

3.Click File and then Save to save the info to the password file.

IMPORTANT NOTE: Creating users does not load them into the Switch Cards. Users must be assigned to user groups, (see page 5-22)and user groups uploaded to Switch Cards. (see page 5-26)

Issue 1 October 1998 5-19