Rack Installation
Rack Installation
Introduction This chapter provides the following information:
How to install the Rack hardware
How to wire the Rack backplane for connections to the
qPSTN and DEFINITY ECS. Complete
Lucent Supplied Equipment
DEFINITY Extender Model ® 3000
DEFINITY Extender Model ® 3100
(sold separately from Rack
One twelve slot Rack mountable chassis One power cord
One System Administrator’s Guide
Switch Management Interface software (2 disks)
qOne Analog Switch Card One Quick Installation Guide
Operational | The Rack is to be used with DEFINITY ECS |
Considerations | Version 3, Release 3 or later. |
| Order a separate central office (CO) line at each |
| remote module location. |
| Each Switch Card will need a digital port |
| (extension) from the DEFINITY ECS, and an |
| qanalog line from the (CO) or the DEFINITY ECS. |
| Be sure that the DEFINITY ECS digital port to |
| which the Switch Card is connected is |
| programmed correctly for the telephone type |
| being used at the remote location. |
| Remote Modules, desksets and communication |
| qline cords are NOT supplied with this system. |
| Use |
