NETGEAR UTM50-100NAS, UTM5-100NAS manual E-mail and Syslog Settings, Email Logs to Administrator

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

2.Enter the settings as explained in Table 11-2.

Table 11-3. E-mail and Syslog Settings

Setting

Description (or Subfield and Description)

System Logs Option

Select the checkboxes to specify which system events are logged:

•Change of Time by NTP. Logs a message when the system time changes after a request from an NTP server.

•Secure Login Attempts. Logs a message when a secure login is attempted. Both, successful and failed login attempts are logged.

•Reboots. Logs a message when the UTM has been rebooted through the Web Management Interface. (No message is logged when the Reset button has been pushed to reboot the UTM.)

•All Unicast Traffic. All incoming unicast packets are logged.

•All Broadcast/Multicast Traffic. All incoming broadcast and multicast packets are logged.

•WAN Status. WAN link-status related events are logged.

•Resolved DNS Names. All resolved DNS names are logged.

Email Logs to Administrator

Enable

Select this checkbox to enable the UTM to send a log file to an e-mail address.

Send to	The e-mail address of the recipient of the log file.
	Click Send Now to immediately send the logs that you first must have
	specified below.
Frequency	Select a radio button to specify how often the log file is sent:
	• When the space is full. Logs are sent when the storage space that is
	assigned to the logs is full.
	• Daily. Logs are sent daily at the time that you specify from the pull-
	down menus (hours and minutes).
	• Weekly. Logs are sent weekly at the day and time that you specify
	from the pull-down menus (weekday, hours, and minutes).
Select Logs to	Select the checkboxes to specify which logs are sent via e-mail:
Send	• System Logs. The system event logs that you have specified in the
	System Logs Options section at the top of the screen. However, by
	default, many more types of events are logged in the system logs.
	• Traffic Logs. All scanned incoming and outgoing traffic.
	• Malware Logs. All intercepted viruses and malware threats.
	• Spam Logs. All intercepted spam.
	• IM/P2P Logs. All instant messaging and peer-to-peer access
	violations.
	• Email filter Logs. All e-mails that are blocked because of file
	extension and keyword violations.
	• Firewall Logs. The firewall logs that you have specified on the
	Firewall Logs screen (see “Configuring and Activating Firewall Logs”
	on page 11-13).

11-8 Monitoring System Access and Performance

v1.0, January 2010