NETGEAR UTM50-100NAS, UTM5-100NAS manual Setup Wizard of 10 LAN Settings

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Setup Wizard Step 1 of 10: LAN Settings

Figure 2-7

Enter the settings as explained in Table 2-1 on page 2-9, then click Next to go the following screen.

Note: In this first step, you are actually configuring the LAN settings for the UTM’s default VLAN. For more information about VLANs, see “Managing Virtual LANs and DHCP Options” on page 4-1.

Note: After you have completed the steps in the Setup Wizard, you can make changes to the LAN settings by selecting Network Config > LAN Settings > Edit LAN Profile. For more information about these LAN settings, see “VLAN DHCP Options” on page 4-4.

2-8 Using the Setup Wizard to Provision the UTM in Your Network

v1.0, January 2010