NETGEAR UTM5-100NAS, UTM50-100NAS manual Internet IP Address, Isp, Domain Name Server DNS Servers

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Table 2-2. Setup Wizard Step 2: WAN Settings (continued)

Setting	Description (or Subfield and Description)
Austria (PPTP)	Idle Timeout	Select the Keep Connected radio button to keep the
(continued)		connection always on. To log out after the connection is
		idle for a period of time, select the Idle Time radio button
		and, in the timeout field, enter the number of minutes to
		wait before disconnecting. This is useful if your ISP
		charges you based on the period that you have logged in.
	My IP Address	The IP address assigned by the ISP to make the
		connection with the ISP server.
	Server IP Address	The IP address of the PPTP server.
Other (PPPoE)	If you have installed login software such as WinPoET or Enternet, then your
	connection type is PPPoE. Select this radio button and enter the following settings:
	Account Name	The valid account name for the PPPoE connection.
	Domain Name	The name of your ISP’s domain or your domain name if
		your ISP has assigned one. You may leave this field blank.
	Idle Timeout	Select the Keep Connected radio button to keep the
		connection always on. To log out after the connection is
		idle for a period of time, select the Idle Time radio button
		and, in the timeout field, enter the number of minutes to
		wait before disconnecting. This is useful if your ISP
		charges you based on the period that you have logged in
Internet (IP) Address
Click the Current IP Address link to see the currently assigned IP address.
Get Dynamically from	If your ISP has not assigned you a static IP address, select the Get dynamically
ISP	from ISP radio button. The ISP automatically assigns an IP address to the UTM
	using DHCP network protocol.
Use Static IP Address	If your ISP has assigned you a fixed (static or permanent) IP address, select the
	Use Static IP Address radio button and enter the following settings:
	IP Address	Static IP address assigned to you. This address identifies
		the UTM to your ISP.
	Subnet Mask	The subnet mask is usually provided by your ISP.
	Gateway IP Address	The IP address of the ISP’s gateway is usually provided by
		your ISP.
Domain Name Server (DNS) Servers
Get Automatically from	If your ISP has not assigned any Domain Name Servers (DNS) addresses, select
ISP	the Get Automatically from ISP radio button.

Using the Setup Wizard to Provision the UTM in Your Network 2-13

v1.0, January 2010