Q-Logic 8100 SERIES manual Advanced Adapter Settings, Restore Default Settings, Raw Nvram Data

9–Offline Utilities Fast!UTIL

NOTE:

On some servers, the BIOS code supports selectable startup that overrides the Fast!UTIL selectable boot setting. In such cases, consult the server product documentation for information about configuring the boot device using the server’s Configuration/Setup Utility menu.

Restore Default Settings

The Restore Default Settings option restores the default adapter and NVRAM settings. The NVRAM settings are the adapter settings that were saved the last time NVRAM was updated using the QLogic FlasUTIL utility (option u). If NVRAM has not been updated using the FlasUTIL utility since the adapters were installed, the factory settings are restored.

Raw NVRAM Data

The Raw NVRAM Data option displays raw NVRAM data for QLogic Technical Support to use.

Advanced Adapter Settings

The Advanced Adapter Settings option opens the Advanced Adapter Settings window (Figure 9-7), from which you can view and modify advanced adapter parameters. Modify these parameters only if you are an advanced user or if you have been instructed by QLogic Technical Support.

Figure 9-7. Advanced Adapter Settings Window

Table 9-3describes the parameters in the Advanced Adapters Settings window.

9-8 FE0254601-00 A