Q-Logic 8100 SERIES manual Edit Boot Settings Menu

8–Configuring FCoE in a Linux Environment Boot-from-SAN

n.Enable both Selective Login and Selective LUN Logins

(Figure 8-16). Enabling Selective Logins restricts the discovery of targets to what is specified in the database as a boot device. Enabling Selective LUN Logins restricts the discovery of LUNs to what is specified in the database as a boot device LUN number.

Edit Boot Settings

0.Previous Menu

1.Enable Alternate Boot Device [n]

2.Enable Selective Login [n] Y

3.Enable Selective LUN Logins [n] Y

4.OS Mode [Windows/Linux/Other]

5.EFI Variable EFIFCSanLevel [1]

6.Enable World Login [n]

Figure 8-16. Edit Boot Settings Menu

o.Return to the Main menu, and select Write under Operation.

p.Select Quit from the driver configuration Main menu to return to the EFI shell.

q.At the EFI shell, issue the following command to reboot the server: reset

NOTE:

For information about using the QLogic 8100 Series EFI utilities and driver configuration, refer to “Configuration Settings” on page 9-4.

6.Insert the RHEL 5 installation media into the optical drive on the server. The RHEL 5 installation process starts automatically, if the server boots from the optical drive. For information about installing RHEL 5 to boot-from-SAN, refer to “Installing Software” on page 3-7.

7.Some versions of RHEL 5 require that the adapter drivers be installed on the server during the installation of the operating system. For information about installing drivers with the operation system, refer to “Installing Software” on page 3-7.

8.After the operating system installation is complete, and the server reboots, type the appropriate key sequence to open the system BIOS/EFI Boot Manager.

FE0254601-00 A 8-39