Q-Logic 8100 SERIES manual #ls -l /sys/bus/pci/drivers/qla2xxx

8–Configuring FCoE in a Linux Environment Configuring FCoE Parameters Using QLogic Utilities

Figure 8-6. Locating QLogic 8100 Adapter PCI Devices

Figure 8-6shows PCI bus device IDs 85:00.2 and 85:00.3 for the two FCoE adapter ports.

3.Search the qla2xxx driver to verify that the driver is managing the PCI bus device ID as 85:00.2 and 85:00.3. For example:

#ls –l /sys/bus/pci/drivers/qla2xxx

The search list in Figure 8-7shows that the PCI device IDs, 85:00.2 and 85:00.3, are listed under the qla2xxx section in sysfs.

Figure 8-7. Identifying the Adapter Port PCI Device ID

3.List the contents of the soft link for the device ID. For example:

#cd /sys/bus/pci/drivers/qla2xxx

#ls –l 0000:85:00.2/host*

4.Locate the host* entries in the search list (Figure 8-8) to determine the SCSI host ID.

8-20 FE0254601-00 A