The Set Device Command Timeout utility can set the timeout value for target devices on a selected host, or it can set a common value for all devices on all hosts. This utility sets a timeout value for each target port and applies to all LUNs that are visible through that target port. This utility does not apply to targets that are visible through QLogic adapter virtual ports.
Package Contents
Table
Table 8-22. Set Device Command Timeout Utility Package Files
File | Description |
|
|
COPYING | GNU general public license that describes rights to |
| copy, distribute, and use the open source content in |
| this Linux tool |
|
|
Script file that sets the timeout on the devices con- | |
| nected to the QLogic Converged Network Adapter |
|
|
Readme file | |
|
|
revision.qlsetcmdtimeout.txt | Text file that explains the changes that are new in |
| this version of the package |
|
|
Using the Utility
This utility has a line command interface and a menu interface.
Command Line Interface
To display the timeout values for devices connected to a specified host ID, issue the following command:
#./ql-set-cmd-timeout.sh <HOST #>
To display the timeout values for devices connected to a specified target and host ID, issue the following command:
#./ql-set-cmd-timeout.sh <HOST #> <TARGET #>
To set the timeout values for devices connected to a specified target and host ID, issue the following command:
#
If you omit all command options, the utility displays the timeout values on devices connected to the all QLogic Converged Network Adapter ports.
|
