3.Verify that none of the LUNs presented to the vPort through the zoned storage array ports are visible to the Microsoft Windows operating system. Check for the absence of these LUNs as disks by navigating to the Disk Manager through the Device Manager.
Virtual Port Features and Limitations
When using a virtual port, the Settings and Utilities tabs are not available in QConvergeConsole GUI. As a result, the following features are not available:
Adapter parameter settings
Adapter parameter restore default
Flash update from file
Flash save to file
Adapter parameter update from file
Adapter parameter save to file
Adapter parameter update from templates
Target link speed (intelligent interleaf factor)
Boot device settings
Driver settings
Adapter beacon function
Target list (unavailable in Windows only)
LUN list (unavailable in Windows only)
However, the following tabs are available and reflect the data from the physical adapter:
Target persistent binding
Diagnostics
Information
VPD
Target list
Monitoring
Link status
For more information about setting up and configuring NPIV with your QLogic Fibre Channel adapter, refer to the QLogic Fibre Channel HBA and VM Migration for
|
