Q-Logic 8100 SERIES Set Device Command Timeout Utility Command Options, Sys/class/scsihost/hostX

8–Configuring FCoE in a Linux Environment Using the QLogic Linux Utilities

Table 8-23describes the Set Device Command Timeout utility command options.

Table 8-23. Set Device Command Timeout Utility Command Options

Option	Description
(Abbreviation)
<HOST #>	QLogic adapter port SCSI host ID (hostX)
	as identified in
	/sys/class/scsi_host/hostX/
<TARGET #>	Target ID connected to the adapter port
<TIMEOUT #>	Timeout value (in seconds) to set on the
	devices under the targets <TARGET #>
	that are visible through the host
	<HOST #>.
--help (-h)	Displays the help text
--interactive (-i)	Opens the Set Device Timeout Command
	utility menu interface. Refer to “Menu Inter-
	face” on page 8-56.

8-54 FE0254601-00 A