Q-Logic 8100 SERIES manual Set Device Command Timeout Utility Main Menu

8–Configuring FCoE in a Linux Environment Using the QLogic Linux Utilities

Menu Interface

To open the Set Device Command Timeout utility menu interface, issue the following command to display the menu shown in Figure 8-22:

#./ql-set-cmd-timeout.sh –interactive

Figure 8-22. Set Device Command Timeout Utility Main Menu

Table 8-25describes the Set Device Command Timeout Utility Main Menu Options.

Table 8-25. Set Device Command Timeout Utility Main Menu Options

Option	Description
HOSTX	Select a QLogic adapter port for which to display or set the tim-
	eout value. Selecting this option opens the SELECT TARGET
	for HOSTX sub menu (Figure 8-23).
SELECT ALL HOSTS	Select the target devices connected to all QLogic adapters for
	which to display or set the timeout values. Selecting this option
	opens the Modify/Display Timeout menu (Figure 8-24).
SET COMMON	Set the timeout value for all the target devices that are visible
TIMEOUT FOR ALL	by all the QLogic adapters in the server. At the prompt, type a
HOSTS	timeout value in seconds.
QUIT	Exit the Set Device Command Timeout utility.

8-56 FE0254601-00 A