Q-Logic 8100 SERIES manual Vlan Local Area Connection Entry, Removing Vlan ID Assignment

6–Configuring NIC Functionality in the Converged Network Adapter Configuring the NIC in a Windows Environment

12.After successfully assigning a VLAN ID to the team or interface, a new logical interface appears in the Microsoft Windows Network Connections window as shown in Figure 6-19, and the local area connection for the teaming logical interface would be disabled.

Figure 6-19. VLAN Local Area Connection Entry

13.Complete the configuration of the VLAN ID assignment by assigning a dynamic or static IP address to this enabled logical interface. The Windows command, ipconfig /all, lists the newly created logical interface but not the physical interfaces and the teaming logical interface. These interfaces are not listed because the logical team interface is visible to the operating system for all operations, while the QLogic VLAN/teaming driver manages the physical interfaces and teaming.

Removing VLAN ID Assignment

NOTE:

Creating, modifying, or dissolving network VLANs can cause loss of connectivity. Do not attempt to configure VLANs on production systems.

To remove VLAN ID assignments from a physical interface or team:

1.Start QConvergeConsole CLI by clicking its desktop icon.

2.In the Main Interactive Menu, type 4,and then press ENTER to select Configure VLANs Menu.

3.In the Configure VLANs menu, type 4,and then press ENTER to select Remove VLAN from Port or Team (Figure 6-20).

a.Choose an entry from the list of physical interfaces and teams from which to remove a VLAN ID assignment.

b.At the prompt, Select ListIndex from the list, type the number that corresponds to the chosen physical interface or team, and then press ENTER.

c.At the prompt, Enter VLAN ID (1..4095), type the VLAN ID to be removed from the physical interface or team, or type All and press ENTER to remove all VLAN ID assignments.

6-24 FE0254601-00 A