Q-Logic 8100 SERIES manual Select Target for HostX Menu Options

8–Configuring FCoE in a Linux Environment Using the QLogic Linux Utilities

Figure 8-23shows an example of the Select Target for HostX menu. The actual menu varies depending on the number of targets that are visible through the QLogic adapter port.

Figure 8-23. Select Target for HostX Menu

Table 8-26describes the Select Target for HostX menu options.

Table 8-26. Select Target for HostX Menu Options

Option	Description
TargetX	Target device for which to set or display timeout values. This
	option opens the Modify/Display Timeout menu (Figure 8-24).
GO BACK TO MAIN	Return to the main menu.
MENU
QUIT	Exit the Set Device Command Timeout utility.

Figure 8-24shows the Modify/Display Timeout menu.

Figure 8-24. Modify/Display Timeout Menu

FE0254601-00 A 8-57