Q-Logic 8100 SERIES Determining the Installed Firmware Version, Download the Multi-boot Image

3–Installation in a Windows Environment Firmware Upgrades

8.Under Boot Code, click the download link for the multi-boot image

(Figure 3-46). The multi-boot image contains firmware, BIOS and UEFI drivers, and the FlasUTIL and EFIUTIL utilities. Make a note of the FCoE firmware version included in the multi-boot image.

Figure 3-46. Download the Multi-boot Image

9.Read the license agreement, and then click Agree.

10.When prompted, select Save to save and extract (unzip) the multi-boot image to a temporary location on your workstation.

CAUTION!

Do not alter any files or the contents of the compressed multi-boot image or the extracted files—this is could corrupt the boot code. Flashing a corrupt boot code, or attempting to update boot code using a different method than what is described in this section, may render the adapter inoperable.

Determining the Installed Firmware Version

Use the QConvergeConsole GUI or QConvergeConsole CLI to determine the firmware version of the QLogic adapter installed in the server. For information about installing and using the QConvergeConsole management tools, refer to Section 2.

To determine the adapter firmware version:

3-34 FE0254601-00 A