Q-Logic 8100 SERIES manual FC HBA Snapshot Utility Command Line Options, Task Command Example

8–Configuring FCoE in a Linux Environment Using the QLogic Linux Utilities

Table 8-17describes the FC HBA Snapshot utility command line options.

Table 8-17. FC HBA Snapshot Utility Command Line Options

Option	Description
(Abbreviation)
Host Number	Specifies the host number of the adapter for which to display
or	information. If you omit the host number, the utility displays infor-
--all (-a)	mation for all hosts. To obtain a host number for a QLogic Con-
	verged Network Adapters port, use the --hostlist option.
--help (-h)	Displays the help text
--hostlist (-hl)	Displays the list of QLogic hosts (adapters) connected to this
	RHEL 5 server
--parameters (-p)	Displays the command line parameters that can be passed to the
	QLogic adapter driver
--statistics (-s)	Displays statistics for the specified host
--procfs (-procs)	Scans procfs-base information, instead of sysfs. This option
	should not be used on RHEL 5-based Linux distributions.
--verbose (-v)	Displays detailed LUN information, in addition to standard
	adapter information

Table 8-18shows a set of tasks that provide information about the QLogic Converged Network Adapter and the FC HBA Snapshot utility command that performs each task.

Table 8-18. FC HBA Snapshot Utility Command Example

Task	Command Example
List default adapter informa-	# ./ql-hba-snapshot.sh
tion for all adapters in the
server
List QLogic adapter ports in	# ./ql-hba-snapshot.sh --hostlist
the server by their host IDs
List detailed information about	# ./ql-hba-snapshot.sh 7
the QLogic Converged Net-
work Adapter port enumer-
ated by the host list as host 7
List detailed information for all	# ./ql-hba-snapshot.sh --all
hosts

FE0254601-00 A 8-49