Q-Logic 8100 SERIES manual Prompt to Reboot, Downloading the Windows SuperInstaller

3–Installation in a Windows Environment Installing Software

10.When the installation is complete, the message Windows has successfully installed/updated your driver software appears. Click Close to exit.

11.If a reboot is required to complete the driver installation or update, Windows will prompt you (Figure 3-30). If you are finished installing drivers for all ports, click Yes. Otherwise, click No and proceed with the installation.

Figure 3-30. Prompt to Reboot

Installing and Updating Drivers Using the Windows SuperInstaller

The Windows SuperInstaller provides the following tasks and functions:

Driver pre-installation

Driver installation

Driver updates

Multiple installation modes: normal, CLI, silent

Management agent installation for Ethernet Networking, FC-FCoE, and iSCSI

QConvergeConsole CLI utility installation

Downloading the Windows SuperInstaller

To download the Windows SuperInstaller:

1.Go to the QLogic Web site: http://driverdownloads.qlogic.com.

2.Click QLogic Products.

3.Click QLogic Adapters.

4.In the selection list, click Converged Network Adapters in the first column.

5.In the selection list, click the adapter model number in the second column.

FE0254601-00 A 3-23